ARP flywheel bolts play an important role in the performance and safety of both street and race cars, which is why the fastener experts at ARP developed bolts far superior to OE hardware. Forged from aerospace alloy and heat-treated prior to thread rolling and machining, both series feature a flat 12-point head design and larger-than-stock shank for improved strength and flywheel register. The premium grade Pro Series has a 190,000 psi rating (originally developed for NASCAR Winston Cup competition)
Fits 1990-1992 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser (DSMs)
Part Number: 107-2801 & 107-2802
Application: MITSUBISHI 2.0L (4G63) 4-CYL
Flywheel Bolt without Washer- Installation
[1] Please check the part-number(s) for your application
against the part-number(s) listed on the instruction
sheet.
[2] DO NOT USE ANY WASHERS with ARP Flywheel
Bolts. They are designed to be installed without
them. Note: ARP will NOT be responsible for any
failures resulting from using a washer with this kit.
[3] Make sure there is an adequate chamfer around the
bolt holes on the flywheel to clear the radius under
the head of the bolt.
[4] Lubricate the threads of the bolt with LOCTITE 242
and the under head of the bolt with ARP ULTRATORQUE
FASTENER ASSEMBLY LUBRICANT.
Then install the flywheel onto the crankshaft and
tighten the bolts hand tight.
[5] Using an alternating or criss cross pattern, torque the
bolts to 95 ft lbs using the specified lubricants
in Step 4.
Menu 