ALTA Performance, has once again set the bar very high for the competition! The ALTA Turbo MINI Cold Air Intake not only adds a proven 10WHP and 10ft-lbs of torque to your 2007+ MINI Cooper Turbo S and JCW, but it also unlocks the sound from your turbo! With our intake not only will you hear the turbo sucking in and compressing the air, but you will hear the OEM blow off valve blowing off too.
Silicone Intake Hoses
The ALTA Five-Ply Silicone Elbow included with our intake, is rated for 200psi, and 400 degrees. Like other ALTA products this part is over built to ensure a lifetime of trouble free use. This is one of the key features to our intake as the bend provides the proper MAF (Mass Air Flow) sensor reading and ensures no Check Engine Lights.
Sound
With an ALTA intake system your car will make a throaty, deep tone on throttle that is undeniably modified. You will be able to hear your turbo spooling and hear your blow off valve every time it opens. Even the stock one.
Aluminum Intake Box
The ALTA Turbo MINI Air Box was designed with light weight aluminum. This provides a stiff, strong, and corrosion proof shroud for the ALTA high flow foam filter and a connection point for the fresh air tube. With a black wrinkle finish powder coat is applied to keep things looking clean and finished for that show appearance under the hood.
High Flow Foam Filter
Included with all ALTA intakes is our high flow foam filter. ALTA Performance filters feature a unique two piece design allowing the user to remove the foam filter element for easy cleaning. Easily run the element under a faucet for cleaning and ring out by hand. Simply slip the foam sleeve back over the filter frame and your ready to go. Many ask us why not a "K&N Style" filter? The quick answer is foam flows much better when dirty. The long answer can be found HERE
Cold Air Intake
Our intake is designed to remove the OEM hood scoop plug/screen. During initial testing we found removing this provides consistent ambient temps to the filter. While it's not a traditional "Cold Air Intake" where the filter is located in a fender well, the ALTA Cold Air Intake is just as good as it still gets a constant flow of ambient cold air. This is just one of the reasons why or intake has dyno proven HP! NOTE: On early production cars the screen is decorative only and is sealed off completely. You must remove it for best performance. On later models the scoop screen is mostly open and can be left in place.
Model No:AMP-INT-401BK
Dimension:19x8x7
Menu 