The Perrin EBCS Pro is Perrin's new and improved version of their former EBCS, which replaces the factory bleed type, boost control solenoid offering an extremely fast reaction time for improved boost control accuracy. The EBCS Pro is a huge benefit for consumers with aftermarket ECU's that use the factory solenoid for boost control such as the EcuTek, Hydra, UTEC, Motec, AEM, Haltech, Unichip (custom programming needs to be done for the EBCS Pro). Add the Perrin EBCS Pro to any aftermarket ECU to provide full electronic boost control without the need to purchase a separate external boost controller. The actuator is operated by a direct-acting single-solenoid. No boost pressure is pressing on the actuator, therefore no premature boost loss can occur.
A much lower wastegate duty cycle can produce higher boost levels giving tuners more headroom when modifying high-horsepower and high boost vehicles. A built in manual override allows tuners to physically test the boost controller for added safety for your car. The Perrin EBCS Pro will also work as a replacement solenoid for all popular electronic boost controllers. Designed to handle up to 120psi, the EBCS Pro features an all new custom made valve, body and coil spring. The Perrin EBCS Pro is a universal product for factory-turbocharged vehicles and requires custom tuning for safe operation. The full Perrin EBCS Pro kit includes, solenoid, wiring harness, mounting hardware, vacuum fittings, 6ft of vacuum hose and full installation instructions.
New EBCS Pro Features:
Nickel plated brass fittings
Operating temp. rated from -40 to 250F, mountable anywhere
New, faster 10-15ms valve reaction speed
Fully custom made and built in the USA!
NOTE: THIS IS NOT A STAND ALONE BOOST CONTROLLER, ENGINE MANAGEMENT AND CUSTOM TUNING REQUIRED!
Model No:ASM-TAC-726
Dimension:6x6x2
Menu 