ACT ::::: ACT MB018X Pressure Plate Xtreme Disc for Mitsubishi

MB018X is an ACT pressure plate that uses exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's Xtreme pressure plates increase clamp load by 50 to 120 percent. Xtreme pressure plates are recommended for use with a street or race disc. Monoloc is a one-piece, direct replacement or upgrade to the standard, two-piece wedge collar and wire ring featured in pull-type clutches. The spring tension of the segmented retaining ring is carefully calculated and tested for optimal performance. It provides uniform loading on the bearing and pressure plate to assure proper alignment, regardless of driver influence or vehicle modifications. Monoloc's hardened chrome-moly steel construction will provide years of service.

Features

• A moderate to stiff pedal feel. Monoloc provides uniform loading on the bearing and pressure plate to assure proper alignment, regardless of driver influence or vehicle modifications.
• Longer clutch life achieved through ACT's exclusive diaphragm design. Monoloc's hardened Chrome-moly steel construction will provide years of service.
• Quiet, trouble-free operation by use of strong drive straps. The spring tension of the segmented retaining ring is carefully calculated and tested for optimal performance.
• Recommended for street and race use
• All ACT pressure plates are dynamically computer balanced for smooth operation at high RPM. Monoloc is a one-piece, direct replacement or upgrade to the standard, two-piece wedge collar and wire ring featured in pull-type clutches.

Specifications

• Description: P/PL-M Xtreme
• Torque Capacity (ft/lbs.):N/A
• Torque Increase Over O.E.: N/A
• SFI: 1.1
• Disc Type: N/A
• Spline Count: N/A
• Spline Size (in.): N/A
• Disc Diameter (in.): N/A
• Disc Diameter (mm.): N/A
• Pressure Plate Type: Xtreme
• Product Weight (lbs.): 12.4
• Warranty (Product Warranty): One (1) Year from Retail Purchase

Vehicle Fitment:

• MITSUBISHI LANCER EVOLUTION 2.0L/2000cc L4 TURBO DOHC (2003-2004)
• MITSUBISHI LANCER EVOLUTION 2.0L/1997cc (122ci) L4 TURBO DOHC (2005-2006)
• MITSUBISHI LANCER EVOLUTION MR 2.0L/1997cc (122ci) L4 TURBO DOHC (2005-2006)
• MITSUBISHI LANCER EVOLUTION RS 2.0L/1997cc (122ci) L4 TURBO DOHC (2005-2006)
• MITSUBISHI LANCER EVOLUTION SE 2.0L/1997cc (122ci) L4 TURBO DOHC (2006)