ACT ::::: ACT SB019 Pressure Plate Heavy Duty Disc for Subaru

SB019 is an ACT pressure plate that uses exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's Heavy Duty pressure plates increase clamp load by 20 to 50 percent. ACT's Heavy Duty pressure plates are recommended for use with a street or race disc. Monoloc is a one-piece, direct replacement or upgrade to the standard, two-piece wedge collar and wire ring featured in pull-type clutches. The spring tension of the segmented retaining ring is carefully calculated and tested for optimal performance. It provides uniform loading on the bearing and pressure plate to assure proper alignment, regardless of driver influence or vehicle modifications. Monoloc's hardened chrome-moly steel construction will provide years of service.

Features

• A low to moderate pedal feel. Monoloc provides uniform loading on the bearing and pressure plate to assure proper alignment, regardless of driver influence or vehicle modifications.
• Longer clutch life achieved through ACT's exclusive diaphragm design. Monoloc's hardened Chrome-moly steel construction will provide years of service.
• Quiet, trouble-free operation by use of strong drive straps. The spring tension of the segmented retaining ring is carefully calculated and tested for optimal performance.
• Recommended for street and race use
• All ACT pressure plates are dynamically computer balanced for smooth operation at high RPM. Monoloc is a one-piece, direct replacement or upgrade to the standard, two-piece wedge collar and wire ring featured in pull-type clutches.

Specifications

• Description: P/PL-M Heavy Duty
• Torque Capacity (ft/lbs.):N/A
• Torque Increase Over O.E.: N/A
• SFI: 1.1
• Disc Type: N/A
• Spline Count: N/A
• Spline Size (in.): N/A
• Disc Diameter (in.): N/A
• Disc Diameter (mm.): N/A
• Pressure Plate Type: Heavy Duty
• Product Weight (lbs.): 13.0
• Warranty (Product Warranty): One (1) Year from Retail Purchase

Vehicle Fitment:

• SUBARU IMPREZA WRX STI 2.5L/2458cc H4 TURBO DOHC (2004-2011)
• SUBARU IMPREZA WRX STI 2.5L/2458cc H4 (2012-2014)
• SUBARU IMPREZA WRX STI LIMITED 2.5L/2458cc H4 TURBO DOHC (2007-2011)
• SUBARU IMPREZA WRX STI LIMITED 2.5L/2458cc H4 (2014)
• SUBARU IMPREZA WRX STI SPECIAL EDITION 2.5L/2458cc H4 TURBO DOHC (2010)
• SUBARU LEGACY GT SPEC.B 2.5L/2458cc H4 (2007-2009)
• Subaru Impreza WRX Sti F4 2L EJ20 (2002-2005)