AEM Induction ::::: AEM 30-2852 High Output Inductive Coil

AEM 30-2852 High Output Inductive Coil

AEM’s High-Output Inductive Coils each deliver over 100mJ of spark energy and a minimum of 40,000 Volts—as much as most CDI systems, without the need for a CDI module! They also provide very long spark duration at full energy, unlike CDI systems and multiple spark systems which fire off small spark events prior to and after their CDI burst to mimic longer spark duration.

Features

• Available for vehicles with external igniters
• Massive Spark Energy, up to 118 mJ
• Incredibly long spark duration, up to 3.2mS
• Up to 41kV Output Voltage, without a CDI
• CDI-like spark energy without the need for a CDI
• Less expensive than aftermarket LS1 coils
• Robust construction allows them to be mounted almost anywhere
• Heavy-duty, weatherproof and shockproof design
• Can be installed directly to engine

Specifications

• Primary Resistance: 0.5 O +/- 10%
• Primary Inductance: 4.8 mH +/- 15%
• Secondary Resistance: 8.5 kO +/- 20%
• Secondary Inductance: 22.5 H +/- 20%
• Output (50pF load): 41 kV +/- 10%
• Output Energy: 118 mJ +/- 7%
• Peak Secondary Current: 100 mA +/- 7%
• Arc Duration: 3.2 mS +/- 10%
• Turns Ratio 71:1
• Maximum Battery Voltage: 17 Volts
• Base Dwell: 3.0 mS
• Max Continuous Dwell: 9 mS but don’t exceed 40% duty cycle
• Max Intermittent Dwell: 80% duty cycle, 5 seconds maximum
• Mating Connector: Packard/Delphi 12162182 “Pull to Seat”
• Mating Contacts: Packard/Delphi 12124075 “Pull to Seat”
• High Tension Wire Terminal: HEI “spark plug top” Style